Acer Aspirer 11 Installing Windows Stuck At 66

  1. Acer Aspire R11 Windows 10 Update
  2. Acer Aspirer 11 Installing Windows Stuck At 66 Inch

To fully disable the Secure Boot in Acer laptops, these are the steps you should follow. Step #1: Boot into UEFI Firmware Settings. Secure Boot settings are only available via the UEFI screen. So, the first thing to do is boot into the UEFI firmware screen. Press “Windows Key + I” to open the “Settings” app in Windows 10. Identify your Acer Device. Enter your device serial number, SNID or model number. Show me where to locate my serial number or SNID on my device. Download our serial number detection utility. (Windows operating systems only) Or select your device: Category. As you can see from the title, i use an acer laptop which means i used the acer Erecovery software. All went well at first, although it took a stangely long time at a screen which said 'setup is starting.' The problem now is, I am now stuck on the acer 'software installation screen!' It is stuck at 41/48 where it is trying to install v1.0.

Windows Stuck at Getting Files Ready for Installation
IMPORTANT: Restore Vital Data Before Fixing 'Getting Files Ready' Error
Fix Windows Stuck at Getting Files Ready for Installation

Getting Files Ready for Installation Stuck When Installing Windows

Some users complained that Windows 10 got stuck at getting files ready for installation. They said that the installation was fine until it reached the 'Getting files ready for installation' screen. This has happened regularly. It always gets stuck in different percentages (8%, 49%, 17%, etc.). When Windows gets stuck at getting files ready for installation, you can't continue installing Windows or boot your computer as you wish. How to fix this Windows stuck issue? The steps below might help you.

IMPORTANT: Restore Vital Files Before Fixing 'Getting Files Ready' Error

As fixing Windows stuck with 'Getting Files Ready' error may cause file loss during the process. So, it's important that you restore those vital files in advance.

It's suggested that you recover and export your data to an external device.

To restore and export your data for the stuck computer with 'Getting file ready' message, reliable data recovery software - EaseUS Data Recovery Wizard Pro with Bootable Media is able to help.

It enables you to recover and export data when PC won't boot or get stuck at getting files ready for installation in Windows 10/8/7/Vista. Here are the steps:

1.Create a WinPE Bootable Disk

First, download and install EaseUS Data Recovery Wizard WinPE Edition on a working computer. Then, create a WinPE bootable disk of EaseUS data recovery software, which will help you access your hard drive data without booting into Windows.

Step 1. Launch EaseUS bootable data recovery software on a working computer.

Step 2. Select CD/DVD or USB drive and click 'Proceed' to create a bootable disk.

2.Recover data from crashed OS

Connect the WinPE bootable disk you have made to the PC with the corrupted Windows system, then, restart the computer and go to BIOS to change the boot sequence. Press F2 when you start your PC. It will allow you to run EaseUS data recovery software and recover data without Windows.

Step 1. Select the disk where you want to recover data and click the 'Scan' button.

Step 2. Let the software scan the selected disk to find all the files and folders.

Step 3. Preview and choose the files you want. Click the 'Recover' button to save them to a safe place. You'd better choose a different drive to avoid data overwriting.

After you scan and recover all the data, remember to save them on an external device.

Fix Windows 10 Stuck at Getting Files Ready for Installation

After you export your data, you can follow the methods below to fix 'Windows 10 gets stuck at getting files ready for installation' issue.

Method 1. Reset the BIOS

Step 1. Enter your BIOS, go to the Boot section and check your boot priority list.

Step 2. If your boot drive (SSD/HDD) is not at the top, make it your number one priority rather than Windows Boot Manager or USB HDD or DVD Rom for example.

Step 3. Save and exit the BIOS.

Step 4. Reboot your computer.

Method 2. Try Booting Your Computer in Safe Mode

Safe Mode starts your computer with only necessary drives and services. By doing so, it limits your Windows operations to basic functions, which can serve as a troubleshooting function.

Step 1. Hold the power button down for five seconds or until the computer shuts down.

Step 2. Press the power button again to turn it on.

Step 3. The PD should say Windows failed to start or something along those lines.

Step 4. Choose 'Advanced Repair Options' > 'Troubleshoot' > 'Advanced Options' > 'Start up Settings'.

Step 5. Click 'Restart' and choose 'Safe Mode' to enter the safe mode.

Acer Aspirer 11 Installing Windows Stuck At 66

Step 6. Log in and then reboot your computer.

Method 3. Delete Problematic Files

Restart your PC and you will see the Windows Boot Options page:

Step 1. In Windows Boot Options menu, choose 'Troubleshoot' > 'Advanced Options' > 'Command Prompt'.

Step 2. In the command line, type C: cd WindowsSystem32LogFilesSrt. SrtTrail.txtand press 'Enter'.

Here, if you see something like this: Boot critical file c:windowssystem32driversvsock.sys is corrupt, navigate to the specified location using the Command Prompt and enter the Del command to delete the problematic file.

Conclusion & FAQs

If all the solutions above all fail, do not worry. You still have a chance to solve it - try to perform a clean install. To do so, you can refer to the tips for clean install Windows 10 without losing data. Then you will know how to perform a clean install again without difficulty. If you think it's time-consuming and worry about misoperations of yourself, you can also ask help from professional support center nearby.

Moreover, if you're experiencing other similar update issues in the following examples while installing the latest Windows 10 update, check the quick answers and try to fix it by yourself.

1. How long does it take for Windows 10 to install?

In a nutshell, it would take around 2-3 hours for Windows 10 to be installed on your system. This is the estimated duration for doing a clean install. Though, if you have an outdated machine or are trying to install the Enterprise version of Windows 10, then it can take up to 4 hours to complete the process.

2. How to restart Windows 10 installation?

There are several ways for you to restart a Windows 10 installer, and we chose the most direct way for you to follow.

1. Press Windows + R, type services. msc and hit Enter.
2. Scroll down and find the Windows Installer.
3. On the General tab, make sure the service is started under Service status.
4. If the service is not already running, under Service status, click Start, and then click OK.

3. How do you fix Windows cannot install required files?

To fix Windows cannot install required files while installing Windows, try to fix it step by step:

1. Make sure that your DVD drive is clean.
2. Remove overclock settings.
3. Attach your hard drive to a different SATA port.
4. Make sure that you're installing the correct version of Windows.
5. Disable Execute Disable Bit option in BIOS.
6. Make sure that you’re not installing Windows on a large partition.
7. Change the hard drive type to IDE.
8. Check your hardware.

4. What to do if the computer gets stuck installing updates?

Acer Aspire R11 Windows 10 Update

To fix a stuck Windows update, here are some suggestions that might help you.

Acer Aspirer 11 Installing Windows Stuck At 66 Inch

  • Make sure the updates really are stuck.
  • Turn it off and on again.
  • Check the Windows Update utility.
  • Run Microsoft's troubleshooter program.
  • Launch Windows in Safe Mode.
  • Go back in time with System Restore.
  • Delete the Windows Update file cache yourself.
  • Launch a thorough virus scan.